Load the photo paper into your printer, front load printers (e.g. HP DeskJet Series 600, 700, 800, 900) load shiny side down, top load printers (e.g. Canon, Epson, Lexmark) load shiny side facing you.

Hold the sheets by their edges.

Remove each print from your printer and allow them to dry printed side up.

Drying time will vary depending on the printer, ink brand, ink coverage, and room conditions (low temperature and high humidity can increase drying time).

Store unused sheets in the original package. Keep the open package in a cool, dry place.

Do not store printed images or open packages in areas subject to high temperatures, high humidity and/or direct sunlight. Note that printed colours may change if storage recommendations are ignored.

Important information

For quality reasons you should store and use this material under conditions of 30-65% relative humidity and at a temperature of 10-30¾C.

Treat your inkjet prints as carefully as you would do with any photograph.

Avoid getting fingerprints on the coated side of the paper before and after printing.

Do not use curled or folded sheets.

Do not scratch the printable surface.

Avoid exposure to moisture, high temperature, and high humidity that could affect drying time and image quality.

The above instructions are a guide only and testing prior to running the job is always recommended. Please contact Stockman Paper Merchants if further details are required.